WALDEN MAGIC MODEL 9’0″ FUSION POLY FCSII

WALDEN MAGIC MODEL 9’0″ FUSION POLY

The MAGIC Model stands the test of time due to its versatility and unique design features. With an emphasis on performance, with a single concave running from the nose through to the midpoint creates lift and stability, which is perfect for controlled nose riding.

Walden surfboards come without fins and fin screws. The centre fin box is best suited for ROAM longboard fins, FCS screw and plate longboard fins and Futures longboard fins.
 

Dimension	Vol.
9’0 x 22 1/4″ x 2 3/4″	67,6 litri

 

Construction

• PU Core
• PE Resin
• 6oz Fiberglass w/4oz Patch
• Wood-Ply Stringer
• FCS II Fin Boxes
• Cut-lap Lamination w/Resin Tint
• Gloss and Polish Finish

The Magic rocker, Magic rails, and the Magic hull, is very unique to Walden Surfboards, the front 1/2 of the hull is concave, this single concave transitions into a double concave in the rear and the back 1/3 transitions into a moderate “V”. The concave nose adds lift and stability, perfect for noseriding. The double concaved hull and hard rails make the board fast, stable, responsive and manoeuvrable in all conditions. The Magic rails are hard, they tend to be harder than most other longboards, the unique bottom curves & bevels keep the rails from catching unlike most other hard rail boards.

***Fins Not Included

FUSION POLY
1. PolyUrethane Core // High-density polyurethane core for performance and feel
2. PolyEster Resin // Advanced polyester resin for strength and flex
3. 6oz Fiberglass w/4oz Patch // E-glass has the highest strength-to-weight ratio
4. Wood-Ply Stringer // Natural wood fibers creates a natural flex and adds break-strength
5. FCS II or Futures Fin Boxes // Takes just seconds to insert and remove the fins
6. Cut-lap Lamination w/Resin Tint // Adds strength and durability plus tint creates a unique look
7. Gloss and Polish Finish (*On select models) // High gloss finish to turn some heads on your paddle out